I am getting a Phenom Pro with carbon rails as a warranty replacement for another saddle, will the stock post from my Camber be ok with that or do I need a special post with special cradle for the carbon rails?
madsedan
Usually if you have a seatpost with a top and bottom clamp it should work just fine.
Some seatposts that have side clamps the clamps are to round as most carbon railed saddles have more of a square edged rails.
Some seatposts that have side clamps the clamps are to round as most carbon railed saddles have more of a square edged rails.
If I remember correctly the saddles with carbon rails have a warning sign on them that says something like; For two bolt style seatposts only.
So I would say the post above is correct in that the single bolt(sidemount) will not be safe.
So I would say the post above is correct in that the single bolt(sidemount) will not be safe.
Yep, I'm going to have my shop install it for me so it doesn't get screwed up.
The factory post on the Camber is fairly light and has a clamp system with a "top/bottom" clamp which sounds like what you guys are talking about.
The factory post on the Camber is fairly light and has a clamp system with a "top/bottom" clamp which sounds like what you guys are talking about.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
