Have you guys bought the new Albert Pro or Shredda tires?
Shredda is made from same as Albert.
Shredda is made from same as Albert.
@gasmanxj would you have a picture of the 2.6's tread by any chance?
How many psi did you pump up in the tire?Just came out of the 18 road stuff which is fast hard pack. These tires require a LOT of psi on that stuff. Dunno if I'll be buying seconds.
That's really not bad. I put my 2.5 Gravity Soft through 6 days of punishment (trail version for other days) and the wear was pretty heavy, though I wasn't surprised because the "soft" on this model tire is pretty dang Soft. But other reports, such as yours, bode very well for the longevity!Here's what my rear Albert (2.5 Gravity Soft) looks like after 546 miles of AZ/UT/CO trails. Traction falling off so time to swap out soon but happy with wear/performance.
View attachment 2140822
High PSI to limit squirm, or squirmy feel at least? Albert Trail? Even at this higher PSI, did the radials still not feel more damped than non radial tires? And how much do you weigh?Just came out of the 18 road stuff which is fast hard pack. These tires require a LOT of psi on that stuff. Dunno if I'll be buying seconds.
2.6 gravity. Not squirm but whole tire flex. I could easily roll the tire off of the rim at even 4 and 5 psi over what I typically run. That might be the shape and extra volume of the tire. I am now thinking the 2.5 gravity was probably the correct casing for me. Also, at higher PSIs the 2.6 behaves very much like a very round tire (tracks like crap) and is not very good at off-camber stuff either. I probably weigh about 235 lb right now, which is roughly 10 lb more than when I'm in top riding shape. Going to go ride horse thief right now and get a gauge for how that PSI works on sharp ledgey stuff. I will base my selection off that but will probably end up putting my Marry up front for Moab and keeping the 2.6 in the rear.High PSI to limit squirm, or squirmy feel at least? Albert Trail? Even at this higher PSI, did the radials still not feel more damped than non radial tires? And how much do you weigh?
Thanks for the feedback!
Ahhh right. Thanks for the feedback. Pretty sure I won't be rolling these off the casing (edit: meant to say "I won't be rolling the casing off the rim"), as I'm only 160lb kitted up, so you probably need 30% more tire than me, relatively speaking. And It's quite possible high speed berms might not be the main game for these tires...though I'm fairly confident square ledgey stuff is! In Moab, I ran the MM up front, and the Gravity Albert Soft (2.5) out back 6 of 8 days...it was great. The other days I ran a Trail Albert (the only day I didn't ride blacks and double blacks), and one day I ran heavy inserts under the gravity casing out back and also under the trail casing in front, which also proved to be a great, damped combo. Anyhow, I'd love to hear your feedback after Horse Theif and Moab. I don't suppose you can get your hands on a 2.5 Gravity to compare?2.6 gravity. Not squirm but whole tire flex. I could easily roll the tire off of the rim at even 4 and 5 psi over what I typically run. That might be the shape and extra volume of the tire. I am now thinking the 2.5 gravity was probably the correct casing for me. Also, at higher PSIs the 2.6 behaves very much like a very round tire (tracks like crap) and is not very good at off-camber stuff either. I probably weigh about 235 lb right now, which is roughly 10 lb more than when I'm in top riding shape. Going to go ride horse thief right now and get a gauge for how that PSI works on sharp ledgey stuff. I will base my selection off that but will probably end up putting my Marry up front for Moab and keeping the 2.6 in the rear.
Awesome on Horse Thief! That's the first proper fins and ledges I've hit with them and they're fantastic on that. Work crazy good on the techy roll-ins, too...just really calms everything down. The rolling speed up and down due to the compliance is also phenomenal.Ahhh right. Thanks for the feedback. Pretty sure I won't be rolling these off the casing, as I'm only 160lb kitted up, so you probably need 30% more tire than me, relatively speaking. And It's quite possible high speed berms might not be the main game for these tires...though I'm fairly confident square ledgey stuff is! In Moab, I ran the MM up front, and the Gravity Albert Soft (2.5) out back 6 of 8 days...it was great. The other days I ran a Trail Albert (the only day I didn't ride blacks and double blacks), and one day I ran heavy inserts under the gravity casing out back and also under the trail casing in front, which also proved to be a great, damped combo. Anyhow, I'd love to hear your feedback after Horse Theif and Moab. I don't suppose you can get your hands on a 2.5 Gravity to compare?
Ah, yes, that's something that hasn't been talked about (much, or at all)...real-world rolling speed. I suspect when rolling resistance has been discussed/considered previously in this forum, it's mostly been fire road climb-type rolling resistance. And some mag reviews talk about how surely the supposed larger contact patch adds to the rolling resistance just a little (though I'm not sure they actually feel the extra rolling resistance from greater contact patch). But having a more damped, compliant tire (such was when running low PSI in conventional tires) is going to actually going to reduce rolling resistance in the chunk!Awesome on Horse Thief! That's the first proper fins and ledges I've hit with them and they're fantastic on that. Work crazy good on the techy roll-ins, too...just really calms everything down. The rolling speed up and down due to the compliance is also phenomenal.
They're still compliant at higher psi but have noticeably more rebound. I think you're right about high speed berms, maybe they'll nail that with other casings/ tread designs. My faith is restored as a choice for Moab.
I'm 200lbs on a 50lb emtb and I run 26F/28R on a 30mm IW rim. I think that's the absolute lowest I'd go but for you definitely try lower than that.I didn’t notice any increase in rolling resistance on dirt…perhaps a little on the pavement on my way to the trails. Although my PSI is quite higher than I normally run. I was at 26/28….gonna try going down a hair - 24/26 and see how that works.
Either way I have it in my head that once Tacky Chans are available in radial I’ll be running that on the rear.
Yeah, I bet I could even go down to 22/24I'm 200lbs on a 50lb emtb and I run 26F/28R on a 30mm IW rim. I think that's the absolute lowest I'd go but for you definitely try lower than that.
I'd recommened taking it down 1psi at a time. Seems to have a bigger effect than with other brands.Yeah, I bet I could even go down to 22/24
At your weight, if you don't have an abundance of square edged rocks, I think you'd still be safe at that pressure. OF course my psi measuring device is surely different than yours. For whatever reason, I'm liking a little more support in/on the berms with the front tire, so I've been running 24/24 for trail riding. IF lots of chunk expected (Moab trip for example), I then step up to Gravity 2.5 in the rear, but maintain the same 24lbs. I'm 160lbs.Yeah, I bet I could even go down to 22/24
My girlfriend who's 132 lbs tried 20/23 for enduro and said it felt good! She ran 17.5/19.5 on Maxxis tires, dd and dh casing.Yeah, I bet I could even go down to 22/24