Mountain Bike Reviews Forum banner
1 - 20 of 25 Posts
mattbryant2 said:
Thanks for the help, but I do, indeed, need disc hubs. Are Singletracks no longer manufactured, or just not carried by Jenson?
the best thing to do, imo, is save $100 more and get outlaws... best wheelset in pricerange imo.

or if you can get a handbuilt wheelset those are strong, but expensive.
 
JBsoxB said:
the best thing to do, imo, is save $100 more and get outlaws... best wheelset in pricerange imo.

or if you can get a handbuilt wheelset those are strong, but expensive.
Sorry for my ignorance :confused: :(

what do you mean with "Handbuild"? A guy in the bike shop took my hubs, my rims and my spokes and build my wheel... is it handbuild like you're saying??? Why does it makes my wheel stronger???

ps: sorry for my english too....
 
XMAG said:
Sorry for my ignorance :confused: :(

what do you mean with "Handbuild"? A guy in the bike shop took my hubs, my rims and my spokes and build my wheel... is it handbuild like you're saying??? Why does it makes my wheel stronger???

ps: sorry for my english too....
i'm not sure, but it's true. i have had a wheel that was factory built and ir was wobling an inch or so after a week of urban... this handbuilt rear wheel i have now has held up fine after 1 month of hard urban everyday... they're probably stronger because of the care that is put into them to get them trued(etc..) by a professional....
 
Can't comment on the singletrack rims but...

JSUN said:
Sun single track rims and shimano XT hubs. About $140 Dont settle for rhynolites/XT for the same price. Try these guys..
http://www.jensonusa.com/
I love the rhynolites! These things have been better than bullet/bombproof they have been ME proof. I have had them on my old hardtail which I beat the HELL out of learning trials moves, doing drops (even to flat pavement) and riding the rock-strewn front-range trails for over for three years. They needed truing once and one two-minute freebie adjustment at the LBS since I had the bike there. They are not the lightest but if you want a no-hassle rim go with a set of these.

FYI, I am just shy of 200 lbs.
 
The best advice I can give to anyone is buy yourself some spoke wrenches and learn how to true a rim. You don't really need a truing stand, but is DEFINITELY easier with one. Keep your spokes equally tightened and you will have less frequent problems with your rims, no matter what kind they are. It's also a good idea to get them trued and dished by your bike shop ever once in a while. Remember to check your spokes before every ride, and you will prolong the life of your hoops.
;)
 
ok, where can you buy these wheels online?

i like downhill said:
if i were you id try saving up 100 more bucks and buy the azonic outlaws. they are great wheels: sealed hubs and convertable to 20mm axles, plus they are super strong imo.
 
mattbryant2 said:
Thanks for the help, but I do, indeed, need disc hubs. Are Singletracks no longer manufactured, or just not carried by Jenson?
I know others have had good luck with Singletracks, but I would only run one on the front after having a terrible experience with a 24" rear. This is my personal opinion and not reflective of an absolute truth.
 
1 - 20 of 25 Posts