2009 55 ATA Help Please!!!

Kilo G · Aug 1, 2009

Hey you all,

Does this fork come with both positive and negative air adjustments? If so where are they located? I talked to the boys at my LBS and they were so confused they called Marzocchi but the they were gone for the weekend. Also, any suggestions on what air pressure you are running? Thanks for the help!!!!

cort · Aug 1, 2009

Kilo,
Positive Air is adj on the top of the ATA leg (take the little cap off to locate). The Negative Air will balance out on its own - in other wards you don't have to adj it. On the bottom of the ATA leg will be the PAR adj - this is your bottom out feature

Re: air pressures - set it all up according to sag - your gonna have to play with the settings to find your sweet spot

Kilo G · Aug 1, 2009

That's what I thought!!! But when I take off the ATA knob there is only a post the knob attaches to. I pushed down in the hole of the post but no valve or air releasing. I went to Marzocchi's website and everything looks the same except in the picture there is a sticker that reads air adjustment on the top of the leg. WTF????

Jim Z in VT · Aug 1, 2009

I have a '09 44 ata, so I don't know if it's the same or not. But mine has the +air valve at the bottom of the ATA leg (-air is automatically adjusted, as Cort said), ATA travel adjustment knob at the top. Other leg has rebound knob at the bottom and TST compression/lockout adjust knob at the top.

I find the Marz air pressure recommendations a little high. I'm about 200 pounds, and I'm running about 180psi to achieve a 20% sag.

JZ

Kilo G · Aug 2, 2009

Thanks for insight guys. As always, The Forums always comes through!!!! :thumbsup:

2009 55 ATA Help Please!!!

Kilo G

cort

Kilo G

Jim Z in VT

Kilo G

Top Contributors this Month

Recommended Communities