Mountain Bike Reviews Forum banner
Cancel
Create thread New Forums

Road salt,should I be worried?

Jump to Latest
1 - 20 of 29 Posts
J

jetfan2207

· Registered
Joined
·
156 Posts
Discussion starter · #1 ·
Hi all,
I've been using my bike almost everyday through the winter since we've had a mild one. Anyway, with recent ( 2 weeks ago) snow falls and icy roads the town has been salting the roads for the first time this season. I'm still riding, but my bike has a coating of salt on the downtube and front on the handlebars and fork. I wanted to wash it off and clean it really well and wax it but it's too cold to get the hose out and start washing. Should I be worried that the bike is not gonna hold up? How is bike paint compared to car paint? I waxed the heck out of the frame before the winter (I put on like 5 coats of car wax). Tomorrow is gonna be like 40 so I might try to wash it then.

Thanks in advance,
Steve
 
#2 ·
jetfan2207 said:
Hi all,
I've been using my bike almost everyday through the winter since we've had a mild one. Anyway, with recent ( 2 weeks ago) snow falls and icy roads the town has been salting the roads for the first time this season. I'm still riding, but my bike has a coating of salt on the downtube and front on the handlebars and fork. I wanted to wash it off and clean it really well and wax it but it's too cold to get the hose out and start washing. Should I be worried that the bike is not gonna hold up? How is bike paint compared to car paint? I waxed the heck out of the frame before the winter (I put on like 5 coats of car wax). Tomorrow is gonna be like 40 so I might try to wash it then.

Thanks in advance,
Steve
Click to expand...
yes

http://forums.mtbr.com/showthread.php?t=271658

http://forums.mtbr.com/showthread.php?t=270090
 
#3 ·
Yes again.

I drove across Kansas in 2004 around Thanksgiving during an ice storm with my bike on the hitch rack. Road salt and that mag chloride crap was sprayed all over the frame. By the time I got to Longmont, CO, all the hex bolts had some rust on them. The paint was fine, but the chain, bolts, and front derailleur clamp had some small amount of rust. I ended up having to replace the bolts on my Thomson stem because I couldn't get rid of the rust.

Nasty.
 
#4 ·
Since your frame is pained (and waxed) it should be ok, but the salt will destroy most of the components on the bike.
 
Save
Reply Quote Like Like
#5 ·
I bought a Bullit w/a 5th element on it back in February of 04. I took it to my LBS to cut the steerer tube. A day or so before we had snow & they had salted th' roads so my new bike got road salt all over it. As I rode my bike into the summer, I started noticing spots on the body of the shock each time I washed/wiped down the bike. After a while I noticed them on the spring as well. After a yr or so of riding, the shock was lookin' hideous. I sweat like a pig when I ride, cold or hot weather, & this just made it worse & expedited the corrosion process. I eventually bought another spring & cleaned up the shock body & painted it. Changed the whole look of my bike.
 

Attachments

Save
Reply Quote Like Like
#6 ·
I fight fight that problem every day, for about 6 months.

You got to get the salt and muck off regularly.

If I used a hose I would have a skating rink, so a bucket of warm soapy water, with the bike up on the work stand, put the bucket under the bike, I can get it clean with maybe a 1/2 gallon of water on my garage floor that just evaporates.

BTW the car wax, works great for me, so far you doing great.

I put grease in all the bolt heads, so that they don't rust at all.
 
#9 ·
The salt corrodes anything made of steel, which on the typical bike adds up to alot of smaller pieces such as bolts, chains, skewers, etc. Salt is brutal on a bike.

I live in Western NY where every ride for me ends in a bike cleaning with buckets of warm water, or cold water if the outdoor faucet is operable. It's worth the extra 15-20 minutes of effort. Dry it off and relube it. If it gets very cold, bring it inside so the cables, etc won't freeze up.
 
#11 ·
ThrashNY said:
The salt corrodes anything made of steel, which on the typical bike adds up to alot of smaller pieces such as bolts, chains, skewers, etc. Salt is brutal on a bike.

I live in Western NY where every ride for me ends in a bike cleaning with buckets of warm water, or cold water if the outdoor faucet is operable. It's worth the extra 15-20 minutes of effort. Dry it off and relube it. If it gets very cold, bring it inside so the cables, etc won't freeze up.
Click to expand...
I hadn't cleaned my bike since I rode it last, even though it was only for a few minutes just to check out the new brakes & other parts I put on. I just washed the brakes, rotors & all of the lower parts with water & used a quick Liquid wrench spray lubricant to prevent the rust & waterproof it a little.
 
#13 ·
Pooh Bear said:
Think of your nipples! Always wash'em, too.

If not, wheel trueing will be impossible, because even brass will shear off when salted long enough.
Click to expand...
+1...

...also take care to clean your free wheel, bottom bracket, and V-brake bearings...last year my free wheel seized and I had a fixie until I found a used cog set. Peddle beat the crap out of my ankles on the descents

If you ride in the snow and salt, why not buy a beater and toss it in the spring? The $50-$100 is worth it as it lets you store the better bikes until the first rains wash away the road salt
 
#14 ·
Just a rant.

I put on about 3000 km a winter, on my one and only very best bike.

I like to ride it, it is a mountain bike,

I think it should take the mud, snow, and salt (from a great ocean beach ride), with very simple and standard maintance methods. Wash clean and re-lube etc.

I am just about there with a light 27 lb bike, and some pretty high end equipment.

While, it is certainly possible to ride beaters etc, it is my crusade to get a high end light durable bike, for all conditions.
 
#15 ·
jeffscott said:
Just a rant.

I put on about 3000 km a winter, on my one and only very best bike.

I like to ride it, it is a mountain bike,

I think it should take the mud, snow, and salt (from a great ocean beach ride), with very simple and standard maintance methods. Wash clean and re-lube etc.

I am just about there with a light 27 lb bike, and some pretty high end equipment.

While, it is certainly possible to ride beaters etc, it is my crusade to get a high end light durable bike, for all conditions.
Click to expand...
That's sad...for a few $, you can ride all winter and still protect your investment in your good bikes...Commuting in the city year round and riding at the cottage kills a couple of beaters each year, or so, at least I can save my good bikes for conditions that will not kill them

just my .02 CAD...some of our other bikes:
 

Attachments

#17 ·
Nice all of them.

Hey but this year,

no new chain, no new bearings, no new BB, no new cassete. Only failure is front fork, not due to cold or salt.

Really no failures attributable to cold salt and muck.

So as I said, I am just about there. In fact i am working on lighter.

I am sad, you are sad.
 
#19 ·
Don't know why the brake pads would dissolve in the snow.

I went with Kool stop pads that lasted way bettter than stock shimano.

I am back to stock shimano cause I upgraded to XTR's, they are wear a little faster and are squeaking more, they seem to last about 2000 km so I'll be back to Kool stops by oh end of April.

The road muck does build-up on the rotors to form a glossy frictionless sheen, but isopropyl alchol once a week keeps this under control, and is a recommend maintance procedure.

Sorry my camera is at home, last week -20 C 160 mm of snow (salt and gravel), this week chinook up to 7 C -5 C nights, everything gone to muck and ice, next week Mexico ahhh.
 
#20 ·
JM01 said:
If you ride in the snow and salt, why not buy a beater and toss it in the spring? The $50-$100 is worth it as it lets you store the better bikes until the first rains wash away the road salt
Click to expand...
I tried that, it sucked. My first winter beater was a $150 bike, a month into the winter the hubs and headset were dry and would not spin, the pedals would barely move, it was hell to ride. Now I ride a cheap Norco frame converted to rigid singlespeed with semi-quality parts that came stock on a $1000 bike that went through several rounds of upgrades. The hubs still work after several winters, Shimano UN series BB's last at least a couple of winters, the headset has lasted 3 winters with seveal re-greasings on the lower cup and the brakes work until they are frozen. Much better than riding a disposable bike IMO. Now I just have to do some maintenance and throw on a new chain and cables every year or so. My pocket book and the environment thank me.
 
1 - 20 of 29 Posts
About this Discussion
28 Replies
16 Participants
Last post:
Danke
Mountain Bike Reviews Forum
posts
16M
members
534K
Since
1990
A forum community dedicated to Mountain Bike owners and enthusiasts. Come join the discussion about bike parts, components, deals, performance, modifications, classifieds, trails, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General Discussion Downhill - Freeride California - Norcal Shocks and Suspension Passion