[masm71]

should there be a small screw in inside the shifter cover?
my shifter is clamp type and it is loose, even when tightening fully the outside screw
but it seems there should be a smaller screw in the clamp which keeps it from moving?

Anybody can check it if there is a screw inside the cover?

Thanks

 

[cobba]

Looks like the screw goes into a nut: http://si.shimano.com/php/download.php?file=pdf/ev/EV-SL-M9000-3777B.pdf

Take the cover off and see if you have stripped the thread.

 

[masm71]

Looks like the screw goes into a nut: http://si.shimano.com/php/download.php?file=pdf/ev/EV-SL-M9000-3777B.pdf

Take the cover off and see if you have stripped the thread.

That screw is OK

I'm taking about the small screw between the cover and the clamp

 

[masm71]

So today I had some time to check the shifter more closely.
I had already earlier shaken the shifter to hear if there is any loose parts inside, but nothing shaking.
Today I took my tools home and opened the shifter cover.
I took some time before I noticed that there IS a loose screw inside there... Shimano has used plenty of grease so it had found a good place and the grease prevented it to move loosely around.
So I screwed the screw back, and now the sifter is solid