Mountain Bike Reviews Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter · #1 ·
Hi

The XCL is shown on the chumba web as an 68HA bike with 140mm fork. Is it with the Pike or the TALAS32?

Here is why i ask:
In the past, the XCL had been shiped out with a PIKE but it is offered with FOX these days as well. The Pike has an A2C of 518mm at 140mm and the TALAS32 (actually the float as well) has an A2C of 511mm. The TALAS 150mm is actually only 3mm more than the pike (set at 140mm).
 

·
Registered
Joined
·
1,134 Posts
rmargoli said:
Hi

The XCL is shown on the chumba web as an 68HA bike with 140mm fork. Is it with the Pike or the TALAS32?

Here is why i ask:
In the past, the XCL had been shiped out with a PIKE but it is offered with FOX these days as well. The Pike has an A2C of 518mm at 140mm and the TALAS32 (actually the float as well) has an A2C of 511mm. The TALAS 150mm is actually only 3mm more than the pike (set at 140mm).
Hi - it is based off the Fox 32 forks.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top