Mountain Bike Reviews Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter · #1 ·
"The Whyte 19 CNC machined Rear Dropout offers a method of stepless adjustment of the Chain Stay length from 415 to 435mm. .... When adjusted on the longer chainstay lengths the rear of the bike runs at a slightly lower ride height giving a slightly more relaxed feel that when combined with the long chainstay length really helps stabilise the bike on those long technical descents."

http://www.whytebikes.com/2008/dropout.php

http://www.whytebikes.com/2008/bike.php?ModNo=8W19Trail
 

·
Mr.650b - Mr.27-5
Joined
·
1,630 Posts
lavolpeeluva said:
"The Whyte 19 CNC machined Rear Dropout offers a method of stepless adjustment of the Chain Stay length from 415 to 435mm. .... When adjusted on the longer chainstay lengths the rear of the bike runs at a slightly lower ride height giving a slightly more relaxed feel that when combined with the long chainstay length really helps stabilise the bike on those long technical descents."

http://www.whytebikes.com/2008/dropout.php

http://www.whytebikes.com/2008/bike.php?ModNo=8W19Trail
This looks like a good candidate to me! :thumbsup:
 

·
it's the ride....
Joined
·
522 Posts
I am on the verge of searching a Ti frame for 650b candidate and have to resurrect this thread to find out if any Whyte 19 rider (Ti or alloy) has made a conversion.
Anyone with any experience ?
Again sorry for digging up the old thread.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top