[doismellbacon]

Any word on this new fork model they were showing at Interbike last year?

 

[Cracked Headtube]

2 Months away.
Keep an eye on 650BPalace. I have a FS 650B I'm working on and will likely get a Loop fork.

 

[NoahColorado]

It's here! You can order them now, I think it's just a 3-5 turnaround. BTI have a few in stock too.

Here are some juicy detail shots I recently took....

 

[NoahColorado]

Here's the whole thing if you aren't familiar.....

 

[Kirk Pacenti]

Here's the whole thing if you aren't familiar.....

Can't wait to get mine! :thumbsup:

Cheers,

KP

 

[djembe975]

What's the msrp for these forks?

 

[NoahColorado]

$795

 

[misterdangerpants]

Might it be possible to get this in a (80mm) 1" head tube fitment?

 

[NoahColorado]

Yes it is.

 

[JMac47]

Specs?

Yes it is.

How 'bout travel? What is A/C measurement as compared to say a FOX Float 130 or 140?

Thx in advance.

 

[NoahColorado]

I'm sorry the website isn't up-to-date, I'm working on a new one.

Axle to crown is 534mm for 150, subtract the difference for the different travel settings.

Travel can be internally set at 80-100-120 for the shorter travel model, or 130-140-150 for the longer.

All models offered in either black or white. 1 1/8th steer or tapered 1 1/8-1.5".

4.1 lbs.

15mm axle only.

Gimme a few days and you'll see a new website....

 

[JMac47]

No problem

I'm sorry the website isn't up-to-date, I'm working on a new one.

Axle to crown is 534mm for 150, subtract the difference for the different travel settings.

Travel can be internally set at 80-100-120 for the shorter travel model, or 130-140-150 for the longer.

All models offered in either black or white. 1 1/8th steer or tapered 1 1/8-1.5".

4.1 lbs.

15mm axle only.

Gimme a few days and you'll see a new website....

The 150 looks like it would be a good fit on the KHS 555 I presently have with a Float 130/650B wheel setup. Looking forward to site info when it's up and running.

Thx in advance.

 

[Entrenador]

Offset anyone?

 

[agu]

@entrenador 46mm offset, I believe

 

[Winans]

Offsets are 42mm for forks with the 1.125" crown, and 45mm for forks with the 1.5 tapered crown.

 

[Entrenador]

Website update eta?

Offsets are 42mm for forks with the 1.125" crown, and 45mm for forks with the 1.5 tapered crown.

Not sure if anyone from WB reads this, and if so, whom. Wondering when these bad boys will be added to their website.

Thinking a 42mm offset, 1.125" steerer, 15mm axle will be the Bee's knees, reduced to 100 or 120mm. :thumbsup:

 

[IF52]

Not sure if anyone from WB reads this, and if so, whom. Wondering when these bad boys will be added to their website.

Thinking a 42mm offset, 1.125" steerer, 15mm axle will be the Bee's knees, reduced to 100 or 120mm. :thumbsup:

I think NoahColorado is from WB, no?

 

[JMac47]

Dang youre impatient...

Not sure if anyone from WB reads this, and if so, whom. Wondering when these bad boys will be added to their website.

Thinking a 42mm offset, 1.125" steerer, 15mm axle will be the Bee's knees, reduced to 100 or 120mm. :thumbsup:

This guy would be the "whom"!

http://forums.mtbr.com/showthread.php?p=7833286#poststop

Cool your jets now.

 

[Entrenador]

Not impatient, just eager

This guy would be the "whom"!

http://forums.mtbr.com/showthread.php?p=7833286#poststop

Cool your jets now.

My jets are soaking in an ice bath until further notice.

 

[doismellbacon]

My jets are soaking in an ice bath until further notice.