Tool for internal guides fox

What do you mean by "internal guides"?

bad mechanic said:

What do you mean by "internal guides"?

Click to expand...

in the lowers of fork, there are two "bearings" (dont say in english)

You must mean the bushings in the fork lower.

Here is the tool(s)..

Using the FOX-BBI Fork Bushing Tool

Why do you need to remove those? That's not something that usually has to be done.

yessss. the bushings. But there are any other tool same this, because the BBI cost 800€

Because after 7000 Km i will must see that and isnt money. If i see the stachtions loose the colour this is a big,big problem

reign0 said:

Because after 7000 Km i will must see that and isnt money. If i see the stachtions loose the colour this is a big,big problem

Click to expand...

I didn't understand any of this, but you can make the tools yourself at home:
http://forums.mtbr.com/tooltime/diy-fork-bushing-removal-installation-772499.html#post9554627

Sounds like the stanchions are losing their coating (color) perhaps

That's something you're better off sending out to ha e done. Not many shops can recoupe the price of that tool much less a consumer. Once the new bushings are installed they also need to be sized, which is yet another tool.