Mountain Bike Reviews Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
32 Posts
If you haven't already you might try emailing TLD. I'm sure a lot of the screws are the same between models and years. I have never dealt with TLD but have had trouble finding replacement visor screws locally for two different helmets (one motorcycle and one bike) and after emailing the manufacture had a free set being mailed to me.

I wouldn't expect a free set necessarily but I have always had pretty good luck emailing the manufactures customer service on things like this.

In a pinch you could probably find a suitable screw/bolt at your local hardware store but then you would end up breaking the visor instead of the screw if it were metal.
 

·
Registered
Joined
·
8,564 Posts
I lost on on an old Giro Montaro and found that a rotor bolt was perfect. It looks like my Least would take one as well so I would check that.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top