Mountain Bike Reviews Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
513 Posts
Discussion Starter · #1 ·
What brands are you guys running. Just got the new wheels built and now I'm having tension issues... Any help would be appreciated. BTW it's for an 08 p1.
 

·
Registered
Joined
·
513 Posts
Discussion Starter · #3 ·
The drive slide slips every now and then. No matter how tight it seldomly slides up (toward crank), but never backwards, around 2-3mm... enough to notice the slack. I don't overtighten or undertighten the chain ever
 

·
Registered
Joined
·
178 Posts
Make sure you get the right size for your axle. If it's too big it doesn't help any.

I use the Redline ones from Dan's Comp. I had to cut and file it a bit to fit the drop out on my mob but they work perfect and are nice and light. I had some Haro ones and they weighed a ton.
 

·
Registered
Joined
·
87 Posts
Dirt cheap alternative is a lock washer with external teeth. The teeth bite into the metal of the dropout as the bolt is tightened. Literally, a few pennies at the hardware store. Go with stainless steel to prevent rusting.

 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top