Mountain Bike Reviews Forum banner

1 - 5 of 5 Posts

·
Ultra Ventanaphile
Joined
·
3,346 Posts
Discussion Starter #1
I know there's a Brake Forum but Ventaphiles are so well informed you all tend to answer faster than any other forum..

Question I have.

I have a 04 Z1 Quick Release version. With Hayes Mag Hydros with a 6" Rotor up front.

What adapter do I need to go to the 8" rotor?

I wish I could count on my LBS to answer these questions but alas, I cannot.

Thanks!

-Aaron
 

·
Registered
Joined
·
1,170 Posts
aaron......are you refering to the Z1 FR with the 20mm and QR levers on the bottom of the fork, or are you saying regular old QR axle ?


If you're running a 20mm you'll need: hayes item # 98-15069

and if your running a standard QR then you'll need : hayes item # 98-15604





later, Chad
 

·
Ultra Ventanaphile
Joined
·
3,346 Posts
Discussion Starter #3
Quick Release Period.

and if your running a standard QR then you'll need : hayes item # 98-15604


Just a plain ole 9mm quick release, probably the only real mistake I made when I built up the bike, should've gone 20mm but$$$ was way tight back 5 years ago.

Thanks again for the help, part ordered and 8" stopping power on the way! Whoohoo!

-A
 

·
T , V , & K Rider
Joined
·
2,342 Posts
8" is the only way to go !!!

Ciclistagonzo said:
and if your running a standard QR then you'll need : hayes item # 98-15604


Just a plain ole 9mm quick release, probably the only real mistake I made when I built up the bike, should've gone 20mm but$$$ was way tight back 5 years ago.

Thanks again for the help, part ordered and 8" stopping power on the way! Whoohoo!

-A

I betcha your putting that 8" on the Bruja too !!! :D TIG.
 

·
Ultra Ventanaphile
Joined
·
3,346 Posts
Discussion Starter #5
Yup....

TIGMAN said:
I betcha your putting that 8" on the Bruja too !!! :D TIG.
Bruja it is.

Salty has Avids so they have plenty of power with the 160's but the 170's are tempting me.

Must put CC away, it's starting to burn up!
 
1 - 5 of 5 Posts
Top