Can any one confirm or deny if the X5 FD from the Seeker or the X7 FD from the Goblin are dual pull compatible? Reading the SRAM website it would appear that they are but I've never set up an FD before and am hoping to use one of the FD's I've got (thanks again, by the way!) on an older bike that is top pull.
SRAM X5/X7 2x10 FD, Dual Pull
1 - 3 of 3 Posts
Joined
·
1,844 Posts
I know the X5 on the Seeker is and depending on when the Goblin was made it will be also.
You can tell its dual pull by just looking at the back of the FD that faces the rear tire. If its obvious the cable can be run from the top or bottom then its dual pull.
Hope that helps!
Jeremy
You can tell its dual pull by just looking at the back of the FD that faces the rear tire. If its obvious the cable can be run from the top or bottom then its dual pull.
Hope that helps!
Jeremy
1 - 3 of 3 Posts
Join the discussion
Join now to ask and comment!