Mountain Bike Reviews Forum banner
1 - 7 of 7 Posts

·
Some Dude
Joined
·
274 Posts
Discussion Starter · #1 ·
Just got my Nimble 9 in the mail, came with the usual hanger for a derailleur. I can use it but I'd like to find one specifically for SS. Kona sells one but no idea if it will fit:
Bicycle part Rim Font Circle Nut

Any suggestions?
 

·
Registered
Joined
·
587 Posts
…or ask Canfield if there’s a SS one available. If not, maybe consider buying a spare geared drive side slider and cut the hanger off?
=sParty
Sure sure. Canfield's site says . . . sold out.
Both sides are available together for $90
And the non drive/brake side is $45, and available.
So, spares are available in the future for $45 (or so), and one could always buy a pair of new dropouts for $90. Which is 10% of the cost of the frame, which is kinda whack if you think about it. Better not to.

Shopping other dropouts seems like a reasonable idea, or else it is the garage machine shop to the rescue.
 

·
Registered
Joined
·
587 Posts
Spot looks like a likely option:
$24 for the SS
However! No information on spacing and offset t the axle. It almost certainly won't work.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top