Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
864 Posts
Discussion Starter · #1 ·
I know this has been posted before but I can't seem to find the thread...

I am struggling with my spv valve on my manitou 3 way. I have had to remove about 3 mm from the thread of the valve because it was making contact with my frame when fully compressed (for pics see x-thread: http://forums.mtbr.com/showthread.php?t=142700). Now I don't seem to be able to make a clean contact with any of my shock pumps (I have 2: Wrench science and one from my new Rock shox Reba). Every time I disconnect either pumps, I loose most of what I have put in it. I have tried to modify the presta pin length of the valve to without any success.

So I am looking for an after marked pump adaptor that allows for the modification of when the pin of the valve gets compressed. I remember reading about some company making them but can't remember who. If ya know what I am talking about, I would greatly appreciate the info. Thanks
 

·
Singletrack Addict!!!
Joined
·
913 Posts

·
Registered
Joined
·
864 Posts
Discussion Starter · #3 ·
Relayden said:
The only pump that I have seen with what I think y r looking for is at:

http://www.performancebike.com/shop/profile.cfm?SKU=17604&subcategory_ID=5423#

I have this same pump but different brand. Had to file the threads in order for it to be able to inflate my minute 2 fork. Haven't seen any head or adapter (like this) that you can attach to any other pumps.
Thanks. I've considered buying that pump from them (especially since it is on sale) but I don't want to end up owning 3 pumps. Plus as you stated the pump is getting mixed reviews...
 
1 - 3 of 3 Posts
Top