[Staktup]

• Can anyone recommend some good shock bushing presses/drifts, whatever they're called? I use my bench vise a lot for this and some of these come too long, and I don't always have the correct size sockets to make up for this.
• I bought 2 inexpensive one and they leave a lot to be desired. Thanks in advance.

 

[BigHerm]

I picked up a set from RWC when I wanted to install their needle bearing kit. Worked well to remove old bushings, press needle bearings, and press other shock hardware.

Rear Shock Tools

The best in aftermarket bicycle bearings, components, and suspension products.

www.enduroforkseals.com

They have now come out with a modular press kit for all bearings, I don't have any experience with that.

 

[BigfootDenny]

I recently bought and used the Wheels Mfg. bearing press and drift kit+adapters. Worked well...seems high quality.

Wheels Mfg. Bearing Press
Wheels Mfg. Bearing Press Kit drift set

 

[Cleared2land]

I like this for my shock related applications. Abby Tools

 

[milehi]

I use this press made my MTBR member mountainbiker4life

 

[Staktup]

Thanks everyone. I'll probably bite the pillow and buy the Abbey set. I have a wheels MFG set that is not that good in my opinion and will try this.

 

[eshew]

Rockshox makes one, metal is soft though so have to file ridges off the outside of the face after each use. If the abbey doesn't have that problem it's certainly worth the extra $

 

[Staktup]

Got the Abbey, thanks all