Mountain Bike Reviews Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
159 Posts
Discussion Starter · #1 ·
Hi,

The Shimano FC-M443 as specified at the following link can use 44-32-22T, 48-36-26T chainring combinations. Would the Chain Line/Axle Length of 47.5/117.5 apply to the 44-32-22T combination and the Chain Line/Axle Length of 50/123 apply to the 48-36-26T combination? What does the "LL" prefix for LL123 mean?

http://cycle.shimano-eu.com/catalog/cycle/products/component.jsp?PRODUCT%3C%3Eprd_id=845524441784044&FOLDER%3C%3Efolder_id=2534374302049805&ASSORTMENT%3C%3East_id=1408474395181667&bmUID=1169865714706

However, I have noticed for the FC-M530 (Deore) that there is only one spindle length specified for either combination of chainrings as per the PDF document located at http://cycle.shimano-eu.com/media/cycling/techdocs/en/bikecomponents/FrontDriveSystem/SI-6LEFB_v1_m56577569830563525.pdf

What gives?

Thanks,
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top