Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
246 Posts
Discussion Starter · #1 ·
Salsa states on their website that the Mamasita's geometry was measured using the 80mm Reba with 15% sag. So if an unsagged 80mm Reba has an Axle-To-Crown of 490mm, it would have an A-C of around 416mm if it was sagged 15%.

White Brothers offers the Rock Solid rigid fork in three lengths: 425mm, 445mm, and 465mm.

Just wondering what the recommendation is. Thanks in advance for any input!
 

·
Registered
Joined
·
13 Posts
Amount of sag should be taken off the travel length instead of a-c. You should deduct 15% of 80mm off the a-c length. The 465mm one should be the one to go if you want to retain the geometry.
 

·
Premium Member
Joined
·
48,238 Posts
crawdad said:
Salsa states on their website that the Mamasita's geometry was measured using the 80mm Reba with 15% sag. So if an unsagged 80mm Reba has an Axle-To-Crown of 490mm, it would have an A-C of around 416mm if it was sagged 15%.

White Brothers offers the Rock Solid rigid fork in three lengths: 425mm, 445mm, and 465mm.

Just wondering what the recommendation is. Thanks in advance for any input!
The spec chart also shows a fork length of 468mm with 39mm of offset.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top