Mountain Bike Reviews Forum banner
1 - 2 of 2 Posts

·
ali'i hua
Joined
·
1,796 Posts
Discussion Starter · #1 ·
so i just installed a reba race with pop lock on my 29er (irrelivant?) and heard a rumor that it can be travel adjusted to 100mm of travel. the manual explains setup of the fork nicely (still need to re-read and re-read the "Gate" thingy) but zero about internal maintenance.
can someone help me? thanks ahead of time!
 

·
Registered
Joined
·
907 Posts
SlowSSer said:
so i just installed a reba race with pop lock on my 29er (irrelivant?) and heard a rumor that it can be travel adjusted to 100mm of travel. the manual explains setup of the fork nicely (still need to re-read and re-read the "Gate" thingy) but zero about internal maintenance.
can someone help me? thanks ahead of time!
Everything you need to know is in the service manual
http://www.sram.com/_media/pdf/rockshox/forks/reba/05RebaSLRaceTeamService.pdf

Travel is adjusted by changing spacers that are located under the positive air piston. On the 26" version, 2 spacers gives you 85mm of travel, 1 spacer gives you 100mm, and no spacers for 115mm. I think the 29" version can only be set for 85mm with one spacer, or 100mm with no spacers.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top