Mountain Bike Reviews Forum banner
1 - 8 of 8 Posts

·
try driving your car less
Joined
·
3,097 Posts
Discussion Starter · #1 ·
yes i know this has been asked before... but humor me.
please rec. air pressures for my ~190 pounds on my reba at 80 mm.

and any help on removing the stickers? i tried paint thinner and no dice. i was about to try liquid wrench but thought i would ask here before potentially cooking my fork.

first ride on my new 29er is today if they finish the service on my car in time. for sure tomorrow morning. i will take some pics.
 

·
Registered
Joined
·
8,006 Posts
Can't help on the air pressures, but for stickers, I heat them up with a heat gun, peel them off, then remove residual adhesive with either brake cleaner or laquer thinner (not plain paint thinner, which is usually just mineral spirits of one type or another).
 

·
In FTF We Trust
Joined
·
1,815 Posts
It seems like I'm running around 90-95 psi. both positive and negative in mine and I go about 185lb. in street clothes. Here's the original end-all-be-all thread on Reba tuning.
 

·
try driving your car less
Joined
·
3,097 Posts
Discussion Starter · #4 ·
kosmo said:
Can't help on the air pressures, but for stickers, I heat them up with a heat gun, peel them off, then remove residual adhesive with either brake cleaner or laquer thinner (not plain paint thinner, which is usually just mineral spirits of one type or another).
thanks. i will try a hair dryer.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top