Mountain Bike Reviews Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
Hi, I am looking at the geometry for the Razzo bike and I am not sure which size would be right for me. I've taken a couple of online sizing calculators (competitive cyclist & wrenchscience) and these are the results. My measurements are as follows; Height 5' 8 1/2", inseam 31", virtual top tube 23.7-24.1", overall reach 70.99 cm, frame size (center to top) 17", handlebar width 44 cm, saddle height 69.53 cm. The small (16") has a standover of 29.65" and a ETT of 23.0" (58.6 cm), and the med (18") has a standover of 30.98" and a ETT 23.74" (60.3 cm). If I went with the small it looks like the ETT may be small for me and the med stand over would be too high? If anyone that has this bike and has similar measurements could let me know how the fit is.

Thanks
 

·
Registered
Joined
·
151 Posts
Hey guys, I´m 5´7" and have relatively short legs in proportion to the rest of mi body (Jeans length is 32"). Do you think a small would be a good fit? I´m getting ready to pull the trigger on a 2.0 and exchange it is really not an option for me, I´m getting it shipped international and have to get it right the first time. Thanks!!
 

·
Registered
Joined
·
24 Posts
I'm 5-9 and a half and ride a medium with a 90mm stem. It is a little short on the top tube for me and I will probably go to 100mm. I have about a 30.5 in seam. A medium would seem to fit 5-7 to 5-10 with the correct stem. I also thought i would have less toe overlap with the front tire than i do.I think you need a medium "18in". I love this bike!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top