[tomd003]

Hi,

I wondered if anyone could help me...

Im trying to take of my drive side crank to convert to single-speed. I have unscrewed the screw, with allenkey as shown. I bought a crank puller from a local bike shop, the big screw fit, but the smaller one that goes further into the BB was too small.

Can anyone suggest a crank puller that would fit this crank?

cheers

 

[tomd003]

oh, and its a raceface evolve xc

 

[KRob]

The older RF Atlas cranks had a outer 10mm ring bolt that the inner 8mm crank bolt backed out against, thus extracting the crank.

This new (2013 or 14 Evolve crank has a single 8mm bolt on the drive side that loosens ccw but there's no other bolt that I can see. And nothing but a gaping hole on the non-drive side.

 

[ghettocop]

You need an ISIS/Octolink type crank puller. Not the one for square taper which you are using.

 

[KRob]

You need an ISIS/Octolink type crank puller. Not the one for square taper which you are using.

Well that sucks. Seems like a step backward from the self-extracting type Atlas.