[florihupf]

... basically, is this correct? (see pic).

I am using a Shimano BB and have the spacer on the drive side per instructions and it all works great.

However, on the non drive side I see the bottom bracket exposed? Is this the right thing to say? This is due to the spacer that seems to be attached permanently on the crank and I am sure is there for a reason.

Did I miss to install something here? Or is this expected and all good?

Thanks in advance!

 

[Supah Dave]

What bike and BB size? Doesnt look right.

 

[florihupf]

That is an Orbea Rallon BB width 73mm with a Shimano Hollotech II BB.

 

[Supah Dave]

The cup should be seated flush with the frame. Could be the shell is in backwards and not seated properly. I would take apart and clean it.