Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

·
El Malo
Joined
·
549 Posts
Discussion Starter · #1 ·
I've managed to shred mine on my Heckler in just a year and a half.
Took it apart and noticed that one of the pawls busted, and as it floated freely within the freehub, it mangled the engagement points.
Looks like it needs a spring and pawls kit and also a new freehub.
$50 my cost (wholesale).

Questions I have are...

Have any of you had to re-build theirs in similar fashion and were the results favourable ?

Do you recommend the re-build or just get a new hub and re-lace the rim ?
 

·
Registered
Joined
·
214 Posts
I've managed to shred mine on my Heckler in just a year and a half.
Took it apart and noticed that one of the pawls busted, and as it floated freely within the freehub, it mangled the engagement points.
Looks like it needs a spring and pawls kit and also a new freehub.
$50 my cost (wholesale).

Questions I have are...

Have any of you had to re-build theirs in similar fashion and were the results favourable ?

Do you recommend the re-build or just get a new hub and re-lace the rim ?
Make sure you replace the roller bearings at the same time, sometimes it's a seperate part to order
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top