Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

·
Paper or plastic?
Joined
·
10,591 Posts
Discussion Starter · #1 ·
Okay, so I removed the cap and the bolt from the drive side, but I can't pull either crank. What am I missing?
 

·
Get your freak on!
Joined
·
2,696 Posts
zorg said:
Okay, so I removed the cap and the bolt from the drive side, but I can't pull either crank. What am I missing?
Doesn't sound right...

You need the puller cap and bolt installed to remove them... install both of them to the correct torque then just stick your 8mm wrench in there and turn anti-clockwise...
 

·
Paper or plastic?
Joined
·
10,591 Posts
Discussion Starter · #3 ·
bike_freak said:
Doesn't sound right...

You need the puller cap and bolt installed to remove them... install both of them to the correct torque then just stick your 8mm wrench in there and turn anti-clockwise...
Thanks, it makes sense now. The bolt will just push the drive side crank out. I somehow could not figure it out last night...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top