Mountain Bike Reviews Forum banner
1 - 2 of 2 Posts

·
****************
Joined
·
1,113 Posts
Discussion Starter · #1 ·
Here is how the blackspire stinger works with the DT.

Lighter setup over E13 DRS. for use with dual ring.

The modification is mentioned here:
Noel on Building a Lighter Delirium T
https://forums.mtbr.com/showpost.php?p=4982779&postcount=7

Here is how I did it.

1.. bolt up the e-type Front Der and but in the BB shell.

2. screw the blackspire in loosely and get in general position. Guide: My pinky fit between the roller and chainstay. (Thanks for the tip Dom!)

3. Mark the back of the stinger where it interferes with the e-type plate. (I used a scribe. also could probably use a nail or brad or needle)

4. Remove everything

5. Cut the blackspire stinger where you marked it.

6. Bolt it up. Use some locktite!!

Pic:


Hope that helps.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top