Mountain Bike Reviews Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,124 Posts
Discussion Starter · #1 · (Edited)
After owning my azonic eliminator for 2 years I have finally done what I thought I would never do. I found the effin guide for setting up the suspension. turns out I was running it with 7 1/4 inches of travel in linear mode with the higher BB height.:madman: :madman: :madman: :madman: :madman: :madmax: :madmax: :madman: :madman: :mad: :mad: :mad: :madman: :madman: :madmax:
Now I will finally get a nice progressive ride which stiffens under pedaling and gets the full 8.5 inches:D :thumbsup: :) :rolleyes:


cant get link to work, just google search 2003_eliminator_manual
 

·
Can't get right...
Joined
·
556 Posts
karpiel666 said:
After owning my azonic eliminator for 2 years I have finally done what I thought I would never do. I found the effin guide for setting up the suspension. turns out I was running it with 7 1/4 inches of travel in linear mode with the higher BB height.:madman: :madman: :madman: :madman: :madman: :madmax: :madmax: :madman: :madman: :mad: :mad: :mad: :madman: :madman: :madmax:
Now I will finally get a nice progressive ride which stiffens under pedaling and gets the full 8.5 inches:D :thumbsup: :) :rolleyes:

cant get link to work, just google search 2003_eliminator_manual
Ahhhh i miss my old eliminator(click on my avatar to see it).

U should go 1 better and get an Avy shock w/ 8.75 i2i and a
2.75 stroke. Stock is 8.5 x 2.5. Gives u over 9 inches of amazing travel. Makes the Fox RC fel rigid. Kinda pricey but worth it if you can afford it. gave my eliminator another 2 years of good life til i got my Demo 8 a few months ago. I got a spare frame if u need parts......
 

·
Registered
Joined
·
1,124 Posts
Discussion Starter · #3 ·
I am fairly broke right now, but if you still have the frame in a few months ill probably take it. also what width BB did you run on it, and what size chainring. I cant seem to be able to run anything bigger then a 36 without it jamming into the swingarm.
 

·
Can't get right...
Joined
·
556 Posts
I ran standard Saints on it for a while but most of the time i ran Azonic 454 cranks and had to play ALOT w. spacers to setup cranks right. I ran a 38 tooth w/ e13 guide. My best suggestion would be saints. The BB shell is a standard 73mm im almost positive.spindle on saints is 128mm i think. What cranks r u running?
 

·
Glad to Be Alive
Joined
·
43,006 Posts
karpiel666 said:
After owning my azonic eliminator for 2 years I have finally done what I thought I would never do. I found the effin guide for setting up the suspension. turns out I was running it with 7 1/4 inches of travel in linear mode with the higher BB height.:madman: :madman: :madman: :madman: :madman: :madmax: :madmax: :madman: :madman: :mad: :mad: :mad: :madman: :madman: :madmax:
Now I will finally get a nice progressive ride which stiffens under pedaling and gets the full 8.5 inches:D :thumbsup: :) :rolleyes:

cant get link to work, just google search 2003_eliminator_manual
learning is a wonderful thing
 

·
Registered
Joined
·
1,124 Posts
Discussion Starter · #6 ·
Im running race face prodigy dh cranks with a truvativ BB but one crank is 5 mm longer then the other because the crank that I had on there last bent. This is the first time Ive had the same brand crank on the left and right side, I just take what spare free ones people have beause I weigh 270 and cant afford a nice crankset.
 
1 - 6 of 6 Posts
Top