Mountain Bike Reviews Forum banner
1 - 20 of 369 Posts

587 Posts
Discussion Starter · #1 · (Edited)
So my dream build is almost done! My I9's came in today and look amazing, and so do the FSA Carbon cranks.

Here's the build and some pics of what's come in so far:
Frame: Ibis Mojo Nude Carbon w/Lopes Link & DT Swiss Carbon Rear Shock
Fork: DT Swiss EXC 150 RTL 15mm (2009)
Front: Brake Magura Marta SL (2009) Red 180mm
Rear: Brake Magura Marta SL (2009) Red 160mm
Shifter: Shimano XTR Pods SL-M970 (2009)
Crank: FSA K-Force Light Carbon (2009) 175.00
Bottom Bracket: FSA MegoExo Ceramic (2009)
Front Derailleur: Shimano XTR M971 Bottom Swing (2009)
Cassette Shimano: XTR M770 Titanium (2009)
Rear Derailleur: Shimano XTR M972 Shadow (2009)
Chain Shimano: XTR 7701 (2009)
Wheelset: Industry 9 - w/DT Swiss XRC 330 Disc Carbon Rim Red Hubs Red Spokes
Front Tire: Kenda Nevagal DTC Kevlar
Rear Tire: Kenda Nevagal DTC Kevlar
Headset: FSA Team Issue Carbon w/Campagnolo Record Carbon Top Cap
Stem: Ritchey WCS Carbon Matrix Stem (2009)
Handlebar: Ritchey WCS Carbon Rizer (2009)
Grips: Ritchey WCS
Seatpost: Ritchey WCS Carbon (2009)
Saddle: Selle San Marco Aspide Carbon


aka dan51
6,021 Posts
Those are some pretty crappy pics coming from a photographer ;). Hopefully they were done on a camera phone by the LBS.

When you're done, I expect to see some quality shots of your bike with some of the hotties you shoot. You will then have the COOLEST "check out my Mojo" thread. :thumbsup:

BTW, nice parts list. That's gonna be one sweet bike.

48 Posts
mmm don't think there are a lot of Ibis in Europe, this will be a damn fine carbon dreambike...
I'm expecting the same set of wheels, but with black spokes, under the Xmas three, hope they will be delivered soon...
Any idea on the weight of the wheels?

It's the axle
1,765 Posts
If you ever get the urge, I'd sure like to see a photo of the inside of those rims. There are several questions I can't answer without seeing how they are made.
1 - 20 of 369 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.