Mountain Bike Reviews Forum banner
1 - 6 of 6 Posts

·
Do it for Deegan
Joined
·
109 Posts
Discussion Starter · #1 ·
I just ordered the raidon through the upgrade program (thanks nick!) and I know that the fork can be set at 80, 100, or 120. Out of the box is 100mm and I wana set it to 120mm. Has anyone done this or know where to find step by step instructions? Also I want to put an O-ring on the stanchions if im going to have it disassembled anyway so does anyone know what size and where to find one? thanks in advance.
 

·
Registered
Joined
·
1,072 Posts
I'm pretty sure that fork has a pin/collar system for travel adjust similar to the Epicon.

Adjusting the travel on the Suntour Epicon X2 | MUDDYGOOSE

You'd have to pull it apart to confirm, but it should be similar and easily done. As for the o-ring, that fork should have a 32mm stanchion, so pick up an o-ring in 32mm or just slightly smaller. Any hardware store should have them.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top