[LoudonHucker324]

I have a Sunrace Juju DH hub with the 20mm axle and i cannot get the axle out and i have tried everything!:madman: If you know how to do this can you tell me cause im gettin pissed cause a MTB Park is opening near me soon and i need my new fork instaled.

 

[.WestCoastHucker.]

axle slides in, axle slides out. if it's stuck, smack it harder...

 

[SHIVER ME TIMBERS]

take is to your LBS

 

[Guest]

are you using a marzocchi axle? take off the QR mechanism.......

 

[LoudonHucker324]

It was the axle i used for my DJ 2 but i dont see any QR thing. Whats it look like?

 

[free rider]

uhh, use a cone wrench and take the cones off (i dont know if im talking obout the same thing here)

 

[.WestCoastHucker.]

dude, you put the axle in the hub and now your can't figure out how it comes out? here is a hint, go in the reverse order that you use while putting it together....

 

[RaindogT]

are you lookin

to get the thru axle out of the fork drop outs? Or get the axle (20 mm axle) out of the hub? We might be able to help with more info.

 

[.WestCoastHucker.]

rule of thumb, if the front wheel is smarter than you, you don't belong anywhere near a bike....

 

[LoudonHucker324]

I need to get the axle out of the hub....and i didnt instal it, i bought the bike and it had the axle in the hub and on the fork. How hard would i have to hit it if it was stuck, cause i have beaten the sh** out of it and i got nothin!

 

[.WestCoastHucker.]

so, you can't even get the wheel off the fork?

 

[free rider]

I need to get the axle out of the hub....and i didnt instal it, i bought the bike and it had the axle in the hub and on the fork. How hard would i have to hit it if it was stuck, cause i have beaten the sh** out of it and i got nothin!

it sounds like you havent taken the cones off....something is holding it back, clean all the grease off and take a look what is stopping it, you may need to take both sides off and try from the other side

 

[Guest]

I take it this is not a sealed cartridge bearing hub...... I will shutup

 

[LoudonHucker324]

Never mind.... got it!

 

[LoudonHucker324]

Never mind.... got it!

 

[.WestCoastHucker.]

i'm curious, what was the deal?

 

[bedheadben]

Ya, what did you do?

 

[free rider]

Ya, what did you do?

WHATEVER IT WAS, IT DIDNT INVLOVE CHANGING YOUR SIGNATURE...ALTHOUGH IT SHOULD HAVE

 

[.WestCoastHucker.]

just turn the sigs off if you're that offended. you whiny little baby.....

 

[Ojai Bicyclist]

it sounds like you havent taken the cones off....something is holding it back, clean all the grease off and take a look what is stopping it, you may need to take both sides off and try from the other side

You're an idiot. He's talking about a thru-axle, not an axle as in the internals of a hub. :madman: