Mountain Bike Reviews Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I recently purchased a custom bike built off a 2015 Kona mohola frame. I’m wanting to upgrade some things on it just because and one of them is the drivetrain. This bike has what I believe to be a QR 135mm rear as it has a skewer for an axle. I’m a complete beginner when it comes to bikes and I just want to make sure I get a group set comparable with my bike. Idk if it’s worth just keeping the crankset and upgrading the cassette, derailleur, and shifter or going whole new groupset. I was thinking and sram eagle setup as there is an sx eagle setup I found for sale. What do you think?
The current specs of my bikes drivetrain are :
Crankarms Shimano SLX FC-M7100 (upgraded)

Chainrings 30t 1X (upgraded)

Shimano BB Deore (upgraded)

Chain- KMC X11

Cassette- sun race 11-42t 11 spd (upgraded)

F/D- Shimano Deore

Shifters- Shimano Deore

Brake Calipers - Shimano Deore

Front Brake Rotor - Shimano 180mm

Rear Brake Rotor- Shimano 160mm

Rims- WTB SX19 (original)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top