Mountain Bike Reviews Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
H E L P

I need a bearing for a Ringle Slamma Jamma Headset (1 1/8").
It is for the bottom cup but I think they are the same (top & bottom).

Your help is much appreciated!

T H A N K S
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #3 ·
slamma jamma ringle

Thanks Eric,

What I can do is measure the size of the one bearing in the top cup but I can't measure the height (since it is pretty stuck in the cup...)....
Is this standard too (so is there a standard ratio in diameter and height)?

and then: where to get it? ebay? or just any hardware store...? Or do I sound dumb now :blush: ?

does any one have a crappy slamma jamma lying around somewehre from which the bearing is ofcourse not that crappy ;) ?

help is much appreciated !
 

·
Neo-Retro Forever
Joined
·
1,576 Posts
take the bearings to a local bearing supplier. There will be a code on the seal, and they should be able to get you a match.

Look up "bearings" in your local yellow pages or online in your area.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top