Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Ok, long story short i'm pretty new to building up frames. I have a 2003 Iron Horse Warrior Disc frame I am turning into a hybrid. I have around a 43.8mm ID on both top and bottom before the taper. Using a 1 1/8 steerer.

I was looking at something similar to a ZS44 but it doesn't seem right. Also this FSA Orbit Z No.9Mcup-CC Headset | Chain Reaction Cycles is another option but I don't know if the angle is 36 degrees.

I have attached a pic of the top of the head tube.

Sorry for the noobness

. Product Drinkware Cup Gas Measuring instrument
 

· Premium Member
Joined
·
48,161 Posts
Ok, long story short i'm pretty new to building up frames. I have a 2003 Iron Horse Warrior Disc frame I am turning into a hybrid. I have around a 43.8mm ID on both top and bottom before the taper. Using a 1 1/8 steerer.

I was looking at something similar to a ZS44 but it doesn't seem right. Also this FSA Orbit Z No.9Mcup-CC Headset | Chain Reaction Cycles is another option but I don't know if the angle is 36 degrees.

I have attached a pic of the top of the head tube.

Sorry for the noobness

. View attachment 881894
Use this
http://www.canecreek.com/headset-fit-finder
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top