[cdanijel]

Dear Forum,
I would like to convert my Haro Mary SS to multispeed one. Can you help me with deraileur hanger/drop out? What and where from should I order it (to Europe).

http://www.bikemag.com/gear/bikes/10-21-08-tested-haro-mary-ss-29er/

Many thanks in advance,

Danijel

 

[bhc]

I bought one from the bike shop I bought my Haro Mary at. Did you purchase the bike from a local shop - Haro dealer, if so, they should be able to get one for you.

 

[downhilljill]

If you are in Europe, you best bet will be to order the hanger from DerailleurHanger.com. You'll need hanger #133.

http://www.derailleurhanger.com/haro.htm

Since there aren't cable stops on the frame, you'll need to use full-length housing and zip tie it to your frame.

Good luck!

 

[cdanijel]

If you are in Europe, you best bet will be to order the hanger from DerailleurHanger.com. You'll need hanger #133.

http://www.derailleurhanger.com/haro.htm

Since there aren't cable stops on the frame, you'll need to use full-length housing and zip tie it to your frame.

Good luck!

I just ordered it.
Thank you very much, Jill.

 

[cdanijel]

Hi bhc,
I beleive that they should be able, but local dealer cannot help me with this one.
However, I ordered it from www.derailleurhanger.com as downhilljill suggested.

 

[cdanijel]

I just ordered it.
Thank you very much, Jill.

It is here.

 

[Megas]

Haro Mary SS

I too have a haro mary ss that would like to convert it to a geared bike and front suspension. I see you can order hanger #133 on-line, does anyone know how many cogs you can have in the front of the bike? And how many cogs can you have on the back with this? Thanks

 

[Goran_injo]

You can haave the full 3x9 or 10. Front derailleour is tricky sice you don't have the cable stopper to hold the cabple - I managed to improvise with an ond shifter which is now sawed off and hanging tom the top of the seat tube and holding the front derailleour.

1x10 with 32x36 teeth seems like the best option if you are searching for gears.