Mountain Bike Reviews Forum banner

Hadley rear hub with 10mm bolt on axle?

1K views 5 replies 4 participants last post by  oreo 
#1 ·
I'm wondering if anyone has any input on this hub. Not a lot of choices out there for a 10mm bolt on hub and so far the Hadley is at the top of my list.

29erchico
 
#4 ·
Hadleys are my favorite hubs. Durability problems are with the 108pt model, as only one pawl engages at a time. I only run the 36pt models, all of which have been bulletproof (three pawls engaging simultaneously). Had a King hub before, and the Hadley 36pt engagement is "plenty fast" for low-speed technical riding, whereas the standard 18pt Shimano/Hugi engagement is not fast enough.
 
#6 ·
Got the 108pt with 10mm x 135mm spacing. Yummy. No problems either, but with that said, have only had them for about a month or so. Just be aware of the supply problem. It took me about 1.5-2 months to receive them. Hadley may also no longer produce the 108pt anymore...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top