Despite what the Kansas Dept of Parks may advertise, the trails at Kanopolis Lake are not multi use horse/MTB trails but are for horses or hiking only. I could go on a rant but I'll save that for another time.
2 of the "rideable" water crossings were anything but. The point being I began riding one but it quickly got too deep and my bike had water nearly to the fork crown because I couldn't stand well enough to lift it out.
I have a 2014 ex7. I know some stuff is sealed, but what parts should I worry about greasing/taking apart on this particular model? Are the suspension bearings going to be a problem? Hubs, bottom bracket, etc? Thanks in advance for some advice! I've never had a bike submerged before.
Sent from my MotoX using tapatalk
2 of the "rideable" water crossings were anything but. The point being I began riding one but it quickly got too deep and my bike had water nearly to the fork crown because I couldn't stand well enough to lift it out.
I have a 2014 ex7. I know some stuff is sealed, but what parts should I worry about greasing/taking apart on this particular model? Are the suspension bearings going to be a problem? Hubs, bottom bracket, etc? Thanks in advance for some advice! I've never had a bike submerged before.
Sent from my MotoX using tapatalk
