Mountain Bike Reviews Forum banner
1 - 9 of 9 Posts

·
Binge Rider
Joined
·
221 Posts
Discussion Starter · #1 ·
Anyone use a Gravity Dropper seat post on a 2002-2004 Enduro? Curious as how the cable would be routed and if it's worth it. Please post pics too. Thanks- SpineShank
 
G

·
where did you buy yours?

i was contemplating getting one of those. pretty sweet to be able to drop/raise on the fly.
 

·
Vaginatarian
Joined
·
5,685 Posts
mechmann_mtb said:
where did you buy yours?

i was contemplating getting one of those. pretty sweet to be able to drop/raise on the fly.
http://www.gravitydropper.com/
the owner s name is Wayne Sicz
You'll have to call or email for the multiple position as its not showing on the web site
the support is outstanding, I originally ordered the 3" drop, when I emailed about the multiple drop, I got a reply in 10 mins.
check the bolts after you install the seat the front one was poking into my seat and I had to shorten it by a 1/4". It might just be the angle of my seat
 

·
Save Jesus
Joined
·
2,947 Posts
Does the 3 position one cost more? Also, does it look like if you get a post that is too long, that you can chop off the last few inches. Coz Universal Cycles has it for $220
 

·
Vaginatarian
Joined
·
5,685 Posts
beanbag said:
Does the 3 position one cost more? Also, does it look like if you get a post that is too long, that you can chop off the last few inches. Coz Universal Cycles has it for $220
when you order it from gravity dropper they ask you what size post you need so you wont need to cut it. they did'nt charge me extra and I got the 3" first, they give you 30 day trial
excellent support
 

·
Registered
Joined
·
16 Posts
I have one on a '04 Enduro and it works great!

Cable loops nicely along the top tube, I used one of the sticky cable guides, but you could use a cable tie of just leave it!

Go for it, one of the best investments I've made this year.
 

·
Registered
Joined
·
365 Posts
I got one for a 00 Enduro but it was slighly too long for me at 350mm :( . I got the 4" drop model. The 3" model can be cut to almost any size, the 4" models limit is around 325mm.
Wayne said he'd try to make me a custom length if possible or if not hed send me the 3" model. Great customer service.
 
1 - 9 of 9 Posts
Top