Mountain Bike Reviews Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
176 Posts
Discussion Starter · #1 ·
I tried to mount the larger sized Lezyne HV pump and it doesn't work. The pump interferes with the frame pretty badly. A friend is running the shorter Lezyne on his Ripmo, but it rubs on the frame a bit. Anyone know of a pump that mounts up without any rubbing? I've been looking at pumps that mount off the water bottle mounts, but open to other ideas. I'm not into the frame bags.
 

·
Registered
Joined
·
752 Posts
You could use either... I have the 100cc with rdc tool inside. I have an Arundel other-side loader and the fit is good.

I just noticed on the pics above that it could work with the pump on the non-drive side. I tought the dropper cable would interferre... I will have to give it a try
 

·
Registered
Joined
·
176 Posts
Discussion Starter · #10 ·
You could use either... I have the 100cc with rdc tool inside. I have an Arundel other-side loader and the fit is good.

I just noticed on the pics above that it could work with the pump on the non-drive side. I tought the dropper cable would interferre... I will have to give it a try
I tried it on the non-drive side and had issues with cable interference. No problem on the drive side.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top