Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
832 Posts
Discussion Starter · #1 ·
hello,
Is there a place where I can find step by step instructions for servicing the Fox Float 32 fork and the RP2 shock?

They are about 2 years old so I doubt they need a rebuild (they don't have that many miles on them maybe 1000).

I looked for through the sticky here but didn't see any step by step instructions for these models.

Any tips/tricks that I should be aware of?
 

·
Registered
Joined
·
832 Posts
Discussion Starter · #2 ·
well nevermind really...fox's website is great. Used to something like RS that has hardly anything but the owners manual.

Still any tips/tricks are welcomed.

Oh does anyone use the enduro seals on the fox fork's - or are fox's good?
 

·
Registered
Joined
·
456 Posts
I'm using Enduros on my fox float 32 after the fork was rebuilt twice with fox seals and still leaked.

Don't know if it was a bad batch or what but all is well with Enduro seals.

Just follow the directions on the fox site and you'll be okay, also cross reference with Enduros instructions as well.

For a syringe, go to a pet store and buy a bird feeding syringe that measures in CC's, and should only cost you 2 bucks.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top