Mountain Bike Reviews Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Hi!

I've recently done an overhaul of the pivots on a Stumpjumper and found the schematic that completely covers all the bolts and spacers and their orientations (schematic 40 - https://media.specialized.com/support/collateral/0000056004_R2.pdf )

While i have found the same document for the Enduro FSR 2017 (schematic 43), it's from a Russian site (http://www.byka.info/system/files/documents/components/Frames/2017 Enduro_5.pdf) and does not include the frame model and all the spacer, only the dimensional data for all the parts. While this is much better than nothing, i would still like the graphic as well.

So does anyone have a link to the Specialized's version of the PDF containing the model as well?
 

·
Registered
Joined
·
122 Posts
Hi!

I've recently done an overhaul of the pivots on a Stumpjumper and found the schematic that completely covers all the bolts and spacers and their orientations (schematic 40 - https://media.specialized.com/support/collateral/0000056004_R2.pdf )

While i have found the same document for the Enduro FSR 2017 (schematic 43), it's from a Russian site (http://www.byka.info/system/files/documents/components/Frames/2017 Enduro_5.pdf) and does not include the frame model and all the spacer, only the dimensional data for all the parts. While this is much better than nothing, i would still like the graphic as well.

So does anyone have a link to the Specialized's version of the PDF containing the model as well?
They usually include them with a bearings or hardware kit. only info I could find on spec site is the same info with no graphic. You may be able to get one from you local dealer.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top