I see that the fork is available in both 110mm and 130mm versions. Are these forks the same, just with a different travel spacer? Can I drop my fork down to 110mm? Do I just pull the big silver spacer at the top of the left leg out? Or do I move it somewhere? Can somebody point me in the right direction? Thanks.
Dropping the travel on a Marzocchi Drop-Off Comp?
1 - 4 of 4 Posts
If the Stance has a travel adjuster. Pull the top knob off, Pull the spring out. There's a little plastic wedge on the bottom of the spring. Ditch that. Then there's a rod towards the bottom. Unthread it from the uppers. Put a bunch of hose washers on the rod (over the travel adjuster "wings"). Just use as many washers as you want to reduce the travel by. I didn't bother reinstalling the knob or the rest of the travel adjust unit, in case somebody tried to mess with it.scabrider said:
Go down, a few threads, or look in the Lets Talk about Shocks forum. You can see the Sherman I did.
Joined
·
387 Posts
I've got a 110 DO Comp that I would love to bump to 130, so do let me know if you figure this out.
1 - 4 of 4 Posts
