Mountain Bike Reviews Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
587 Posts
I just put a Tranz X on my old SIR 9, with the external cable. This is the same as the PNW Pine. So far I like it. It does have a tiny amount of wiggle when you grab the saddle, but you do not feel it while riding. PNW has a few options since you can run the Chisel with internal or external routing for a 27.2 post. Though there is this on Amazon if you want to try it for a minimal cost at first.

https://www.amazon.com/gp/product/B...9ea-768a917d5900&pf_rd_r=S8WK49RYSK3ZPEAHVXDB
 

·
Registered
Joined
·
172 Posts
Hi. I installed a PNW 27.2 Rainer with 110 mm drop. Spring operated (no air to mess with). VERY happy with it.

I did a video of the installation here:


Remember to get a 27.2 size. Limited options. You can go internal or external routing.

But after a dozen rides, I am very happy with the PNW.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top