Mountain Bike Reviews Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all,

I had myself pretty well convinced that the rear of my bike was an X12 10x135 mm and thats the setup a chose when I ordered a new wheel set. Unfortunately, it appears, that my frame is X12 12x142 mm...
:madman:

Is there anyway I can save this with a conversion kit and a new axle or do I need to have it re-build? Its the AC 29 race wheel set.

Br Julie
 

·
Registered
Joined
·
215 Posts
There is a Thru Axle Retrofit Kit available for each of these thru axle styles available for $35.00US and shipping and you can order the kit from your local American Classic dealer or from our online shop. The kit works on Disc 225 hubs with 6803C3 bearings only. See the HELP tab under manual/hub sets to determine what hub you have and for directions. We also have 10mm thru axle QR’s available through your local bike shop or our online shop on our web site: Web Store. American Classic retrofit kits do not work with any other manufacturer’s hubs.

From AC website.
 
1 - 2 of 2 Posts
Top