Mountain Bike Reviews Forum banner
1 - 4 of 4 Posts

·
Fat guy on a bike
Joined
·
703 Posts
Discussion Starter · #1 ·
My bike is a 02 spec. hardrock comp (stats: here)

Basically i am confused about what model # for the front derailer. I am looking at an XT or LX and i know its pull down, but from there on I am not sure which one is the right match. The dual pull models seem right, but theres a couple different models and i am not sure of the differences.

The rear i am probably going to put an LX as my existing one is beat to hell and hard to keep tuned.

Also, how much value would i get out of replacing the rest of the drive train, casset, etc?

I can't afford the desired whole bike upgrade for a few months so i need to get this bike working well for my training/weightloss. I am a big guy so i put plenty of torque on these components.

Thanks.
 

·
Registered
Joined
·
670 Posts
Go XT. You get more for your money.

Don't forget to look at sram components in addition to shimano. They are generally less expensive, and the rear is a 1:1 actuation, instead of 1:2 like shimano, so IMO it's easier to tune.
 

·
Registered
Joined
·
369 Posts
Mordy, it's a somewhat simple formula = if you ride a lot and are wearing out components go with something higher end - it [generally] last longer, takes more abuse and delivers smoother shifting.

However, for your front derailleur you can go with a new ALIVIO FD-M410 since you have 8 speed (thankfully Shimano has made buying a Front Der. brainless now with their dual pull multi-clamp design). Don't go above Alivio because they are 9 speed and it won't work. Don't bother upgrading your drivetrain. Save your money and invest in a complete new rig when the time is right. Turn that bike into a winter bike or a commuter and put more into a new one. You'll get a better rounded package.

Since your a big guy you will be better suited with a new bike that is more 'off-road' worthy if that is what you are doing/want to do.

kev1n said:
Don't forget to look at sram components in addition to shimano. They are generally less expensive, and the rear is a 1:1 actuation, instead of 1:2 like shimano, so IMO it's easier to tune.
Now this is why you have to be specific on a chat forum. You could look into SRAM components but SRAM's Rear Derailleurs will not work with your Shimano shifters since the actuation ratio is different. You can look at SRAM if you want to change both the shifters and derailleurs. IMHO - if it ain't broke don't fix it (re: the shifters).
 

·
Fat guy on a bike
Joined
·
703 Posts
Discussion Starter · #4 ·
Oddly enough the FD-M410 doesn't seem to be very available. I found 1 on ebay, but none of the major online folks seem to have it. I'll see if my bid lasts ;)

I am gonna be putting a lot of miles on the bike over the next few months, but nothing too demanding offroad.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top