Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
Im going crazy
The chain rubs the cage tail on the lowest gear in front. I made the whole thing work perfectly, then this started again and i tried to bend it a bit and lost my setup. Current setup needs two button presses to go 1 gear in front, im running 3x.
My main lroblem is the tail cage which fkn rubs and annoys me
https://ibb.co/L6257BJ photo here
 

·
EAT MORE GRIME
(ノಠ益ಠ)ノ彡┻━┻
Joined
·
7,809 Posts
lower the derailleur so it is 1-2mm above the largest ring. as long as it can shift up and down and not snag on any rings, make it lower. also just use gear combinations that do not make chain do that...don't choose small cog in back and small cog in front, pick a different combo
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top