Mountain Bike Reviews Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3,161 Posts
My process takes me less than 5 minutes.

Apply locktite on bolts. Put them on loose, depress lever, then hand tighten lightly. Test for rubbing, tap caliper with the back end of a screw driver to center, test again, then tighten with wrench snug. Test again then torque down with a torque wrench.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top