Mountain Bike Reviews Forum banner
1 - 10 of 10 Posts

·
Come see me after class
Joined
·
1,431 Posts
the groove/flathead trick will be really difficult on such a small bolt head. i suggest drilling a small hole through the center and using an extractor. you can find them at your local hardware store.
 

·
Registered
Joined
·
49 Posts
Discussion Starter · #5 ·
thats2odd said:
Best way to deal with a stripper is to tip her!!:thumbsup: All kidding aside I had the same problem on a bolt and the recommendation BigGoofy suggested worked for me.
usually i shove dollar bills down their throat til they stop breathing.... but then they usually kick me out...

btw.. i meant allen head.. and i went and bought a B&H screw remover from wally world... did the trick
 

·
Registered
Joined
·
384 Posts
if it is the pinch bolt for the cable. (only one I can think of the is remotely connect with the cable). The head is exposed

Just grab it with vice grips, back it out, then buy a replacement. Any large set of pliers should do the trick as well,
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top