Mountain Bike Reviews Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter · #1 ·
hi guys, any of you have changed the Crossmax ST front hub bearing before ? can you share with me the size of the bearing ? and what is the best after market replacement for the bearings.

mine is the 15QR version....

Thanks in advance...
 

·
Registered
Joined
·
64 Posts
tech.mavic.com is the dealer tech site. just checked for you the 2010 version. ( is that what you have ? ) 996 885 01 is the mavic part number to order. sorry they dont spec the bearing size number. just pull off the side parts of the hub and read the number on the bearing. mavic bearings are good. check with enduro bearings or step up to fancy 200 bucks ceramic ones.
1 out of 100 is:
http://www.bocabearings.com/bearing...ceramic-peekaboo5/mavic-crossmax-st-front-hub

peace out
 

·
Registered
Joined
·
160 Posts
Discussion Starter · #3 ·
swizzroller said:
tech.mavic.com is the dealer tech site. just checked for you the 2010 version. ( is that what you have ? ) 996 885 01 is the mavic part number to order. sorry they dont spec the bearing size number. just pull off the side parts of the hub and read the number on the bearing. mavic bearings are good. check with enduro bearings or step up to fancy 200 bucks ceramic ones.
1 out of 100 is:
http://www.bocabearings.com/bearing...ceramic-peekaboo5/mavic-crossmax-st-front-hub

peace out
thanks for the reply swizzroller...but i see the ID is 12mm, which is not possible as i'm now using the 15mm QR Thru axle...

I can't find the 996 995 01 mavic part details...
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top