Mountain Bike Reviews Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,065 Posts
Discussion Starter · #1 ·
I have Googles this with no clear win.

I have a 2 y/o set of Ibis Carbon 928 wheels. The rear hub is a DT Swiss rear hub and a black "Ibis" front hub.

I want to convert my wheelset to Boost using corrected end caps. I have the adapter kit with spacers but that is just not going to cut it. The rear hub converted very nicely with proper DT caps. I have no idea who really made the front hub. I called Ibis a few weeks ago and the guy that answered said he did not know. Any idea?

Thanks in advance!
 

·
Registered
Joined
·
190 Posts
This comes up every so often, but here is the answer. There is no kit for converting the hubs other than the spacers which you have used and are a pain.

The hub on my 928 wheels was from Speedtuned I think. Your best option is to either sell the wheel or swap the hub. DT Swiss 350 is a good option, but you'll need to check spoke length.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top